Hydraulic equipment comes in many shapes and sizes, but all hydraulic systems work according to the same principles. Read on to find out about the different Hydraulic Parts in Joliet Illinois that help these elaborate systems function as intended. It will make it easier to troubleshoot problems as they arise.
Hydraulic Reservoirs
Hydraulic reservoirs store non-pressurized fluid. The fluid held in the reservoir supplies the system and covers losses from minor leaks. This component also helps cool the fluid.
Hydraulic Pumps
Hydraulic pumps transfer fluid from the reservoir into and through the system. When it enters the pump, the hydraulic fluid is placed under increased pressure, raising its energy level. The fluid then leaves the pump at increased pressure through an outlet line and moves throughout the system to make it work.
Hydraulic Cylinders
The hydraulic cylinder is where the fluid power or pressure exerted by the pump is converted into mechanical force. As the high-pressure fluid enters the cylinder, it acts on rods and pistons. The fluid level in the reservoir falls while the rods and pistons extend and rise when they retract.
Hydraulic Valves
Most hydraulic systems have two types of valves. They are known as directional control valves and pressure relief valves. The first manages the flow of the fluid through the system, while the latter protects its components against pressure overloads.
The pressure relief valves also limit the force exerted by the motor and hydraulic cylinder. When the pressure reaches a certain value, they release fluid back into the reservoir.
Hydraulic Hoses
Each component in a hydraulic system is connected to the next by one or more hydraulic hoses. These hoses are some of the most frequently replaced Hydraulic Parts in Joliet Illinois, but they’re essential. If they become damaged, it can cause leaks and allow air into the system.
The Bottom Line
Each component within a hydraulic system plays an essential role in its overall operation, so it’s important to ensure that they’re all in good working order. When they need new parts, equipment operators should find a reputable supplier like Miller Hydraulic Service Inc. Check them out on Facebook or visit their website to learn about their products and services today.
