The basic principle for heating and cooling in Manassas is that heat flows from a warm object to a cooler one. Using this principle, furnaces and heaters flow distribute warm air to heat up your home while air conditioners remove the warm air to make your home cooler. For central air-conditioning systems, the ducts used are the same for hot and cold air. The heating and cooling systems have three basic components – source of warm/ cold air, air distribution system and temperature regulation system.
Let us look at few types of air distribution systems used by heating and cooling in Manassas.
Forced-Air Systems For Heating And Cooling In Manassas
Forced-air systems use an electrical fan or blower to distribute the heat or the cold air produced by the furnace or the central air conditioner respectively. The blower uses the metal ducts to force the air to various rooms in the house. There is also a cold air return system of ducts to flow down the cold air as the warm air is blown in. This cold air is then returned to the furnace to get heated again. Same blower is used to distribute the cold air to the rooms and bring back the warmer air to get it cooled again. This system is quite effective and easily regulated by controlling the amount of air flowing in.
The downside of this system is technical issues with the blower, cost of electrical power and furnace fuel and the noise from the blower.
Gravity Systems For Heating And Cooling In Manassas
Gravity systems are based on the natural rising of warm air and are note used to distribute cold air. The furnace in this system is near the floor. The ducts system and registers are used to flow and distribute the warm air as it rises naturally. The registers are usually placed high on the walls and as the air rises to the ceiling, the cooler air sinks down and returns via the ducts to get heated again.
The drawback for this system is that if you use cooling as well during summer month then the air conditioner will require its own distribution system.
Radiant Systems For Heating And Cooling In Manassas
These systems use hot water to heat your room. The water is heated by the furnace and circulated through the pipes. Radiant systems heat up the radiators in the room using hot water. Radiators in turn warm up the air in the room. Locations where electricity is not very expensive, electric panels can be used as well to heat up the radiators. Radiators and convectors are usually found in older homes and use a pump or gravity to circulate hot water in the pipes.
Finding the right distribution system for heating and cooling Manassas is the key to an effective heating and cooling in your house. Talk to the experts at Refrigeration Systems for the solution that is right for you.
