Every year before the warm weather begins, it is very important for a homeowner to spend some time making sure their air cooling system is in good working order. If it is not, it is generally best to have any necessary problems dealt with prior to the start of the hotter months of the year when companies who handle AC repair in Mesa area are generally at their busiest and repair costs can be at a premium.
One of the best ways to check on the condition of a home’s air cooling system is by either performing routine maintenance on the system on one’s own or hiring an AC Repair professional to handle the job. By doing this yearly before the unit is needed on a regular basis, a homeowner can make sure the unit is cleaned and well maintained, as well as discover any repair issues to be handled before the unit is needed most.
Generally, the first thing to be done on an air cooling system is cleaning the blower. The blower is generally found inside the home in the attic or a crawl space. This unit is often used for both the heater and cooling system. Since it is responsible for moving the air from the unit into the duct work of the home, it can attract a good deal of dirt and other debris. This will need to be vacuumed from the unit. In addition, the air filter is generally attached to the unit and it will need to be checked and replaced if necessary.
The motor on the blower will also need to be inspected by a technician who deals with AC Repair in Mesa. The motor should be checked for any signs of scorching or burns. The electrical wiring on the motor should also be inspected to ensure it is in good working order and does not present any type of fire dangers. The fan and fan belt on the blower will also need to be checked and replaced if either appears damaged.
Most air cooling systems also have a unit outside, which contains the condenser and compressor. This unit should also be cleaned by removing any leaves, branches or trash collected in the housing. The coils should be cleaned with water and coil cleaner. Finally, the fins on the unit should be brushed clean with a soft brush.
